Start my Permit (954) 616-5823

If a title search, inspection report or buyer’s question turned up an open or expired permit on a Fort Lauderdale property, the City of Fort Lauderdale is where it gets resolved. This guide covers who issues permits in the city, how to look up permit records in LauderBuild, what permit statuses mean, and the usual steps to close or renew a permit. Every case is different, and approval always rests with the city’s building officials.

Who issues permits in Fort Lauderdale?

In the City of Fort Lauderdale, the Building Services division of the Development Services Department (DSD) handles permitting. The city says Building Services provides property record information, issues permits and performs building inspections. All new permit applications are submitted digitally through LauderBuild, the city’s online portal.

The city notes that it only processes permit applications for addresses inside city boundaries, and its Property Reporter GIS map lets you check your address. DSD is located at the Greg Brewton Center, 700 NW 19th Avenue, Fort Lauderdale, FL 33311. For LauderBuild and inspection help, DSD Customer Service is at 954-828-6520.

How to look up permits in LauderBuild

LauderBuild calls every permit, application or code case a “record.” The city says anyone can do a basic record search without creating an account, though some details are only visible to the record owner.

  1. Open LauderBuild from the city’s LauderBuild page.
  2. Pick a search. Use the Global Search box, or click Search and choose the Permit module for a more targeted search.
  3. Search by address the simple way. The city recommends entering only the street number and street name, and you can use “%” as a wildcard in the street name field. Search criteria must match the record exactly, so a broader search often works better.
  4. Search by permit number if you have one. Include the dashes (for example, BLD-ROOF-0000001). For permits created before October 4, 2019, the city says to add the prefix “PM-” before the old record number.
  5. Open the record and check its status. Click the arrow next to Record Info and select Processing Status to see the record’s steps. The city notes that a green checkmark only means a task was completed, not that it was approved, so expand each item to read the details.
  6. Check the inspections. Under Record Info, select Inspections to see completed and upcoming inspections and their results.

Make a list of every permit that isn’t closed, with its record number and the last inspection result.

What “open,” “expired” and “final” mean

  • Open: The permit was issued, but the required inspections haven’t all been approved, so the permit hasn’t been closed out.
  • Expired: The permit’s time ran out before the work was completed and inspected. The city also says a permit application is considered abandoned 180 days after it was filed, unless it was pursued in good faith or a permit was issued.
  • Final: The required inspections have been approved and the permit is closed. For buildings that people will occupy, the city says an ADA inspection must be scheduled and passed before a Certificate of Occupancy or Certificate of Completion is issued.

Typical steps to close or renew a permit

1. Schedule the missing inspections. If the work is done and the permit is still active, the inspections may be all that’s left. In LauderBuild, open the record, click the arrow next to Record Info, select Inspections, and click Schedule an Inspection. Choose the inspection type, pick a date and select “All Day,” then confirm the location and contact. You can also call Customer Service at 954-828-6520, Monday to Friday, 8:00 a.m. to 3:30 p.m. The city says inspections are generally done between 8:00 a.m. and 3:30 p.m., and to ask for a specific time window, contact your inspector between 7:30 a.m. and 8:00 a.m.

2. Renew the permit. The city says a permit can be renewed once, and any renewal beyond that is up to the Building Official. The city’s charge for renewal is different depending on whether you renew before or after the permit expires, so check the current DSD schedule.

3. Handle work done without a permit. The city refers to this as After-the-Fact (ATF) work. It notes that permits needing After-the-Fact review are not eligible for its Walk-Thru service, so plan for a full review. If you decide to remove unpermitted work instead, the city says you don’t need a demolition permit to remove work installed without permits, unless you plan to demolish more of the building.

4. Use the right application. The city says every permit application needs the Broward County Uniform Permit Application, uploaded with your online submission.

If the original contractor is gone, a new contractor (or the owner, if eligible) will usually need to take over the permit before it can move forward. Ask DSD what it requires for your record.

Owner-builder notes

The City of Fort Lauderdale allows owner-builders in limited cases:

  • As the owner of a one- or two-family home, you may act as your own contractor if the home is for your own use and isn’t for sale or lease.
  • You must do the work yourself or provide direct, on-site supervision.
  • Owners of commercial property must hire a contractor for any work that needs a permit and inspection.
  • You’ll complete and sign an Owner/Builder Affidavit acknowledging your legal responsibilities, under Sec. 9-28 of the Fort Lauderdale Code of Ordinances.

If your contract for the work is more than $5,000, the city says a Notice of Commencement must be filed by the homeowner or contractor.

Free South Florida Owner-Builder & Contractor Permit Checklist

Get our free checklist: what to gather and the steps to follow before you apply.

Get the free checklist

FAQ

Do I need a LauderBuild account to search permits?
No. The City of Fort Lauderdale says anyone can do a basic record search without an account. You need an account for things like applying for permits and full access to your records.

How do I find permits from before 2019?
For permit records created before October 4, 2019, the city says to add “PM-” in front of the old record number when you search.

Can a Fort Lauderdale permit be renewed?
Yes. The city says a permit can be renewed once, and anything beyond that is the Building Official’s decision.

How do I schedule an inspection?
In LauderBuild, open the record, go to Record Info, then Inspections, and click Schedule an Inspection. You can also call DSD Customer Service at 954-828-6520.

Can I pull my own permit as an owner-builder?
Possibly. The city allows owners of one- or two-family homes to act as their own contractor if the home is for their own use and not for sale or lease. Commercial property owners must hire a contractor.

Get Permit Help

Have an open or expired permit in Fort Lauderdale? Permit Busters can help you review the LauderBuild records, figure out what the city still needs, and prepare the paperwork to close it out. Get Permit Help: call (954) 616-5823 or email info@permitbusters.com, Monday through Friday, 9 AM to 5 PM.

This guide is general information, not legal or engineering advice. Requirements change, and approval rests with the City of Fort Lauderdale. Confirm details with the city before you act.

Call (954) 616-5823